Product Category
4  Product
Location: Home ->   Product  ->  CNC Spare Parts ->  Handwheel

Automatic Tool Setting gauge


Product Description:

This is the 4th generation. Now the trigger signal is more stable than the 3rd generation.

Application:
This Low-power wireless tool setting gauge is applicant to operate all kinds of machine CNC center, such as stone carving and jade carving machine.
Support CNC system: Mach3, Mach4, UcStudio, SINUMERIK (SISMENS) and MITSUBISHI.

Electrical specifications:
1.The receiver:
Working voltage: 5V~24V DC
Working current: Rated current<20MA
Wireless distance: 40 meter
Internal relay output: Support 250V/50mA load; normally open; Knife trigger, Relay is closed.
Cable: 1.5 Meter
2. The tool Setting Gauge
Working voltage: 2.4V~3.6V DC (uses 2 pieces AAA batteries, can work for 6 months at least)
Working current: Rated current<20uA;
Wireless distance: 40 meter
Probe precision: 0.01 mm
Low-power warning: please exchange the batteries when low power led light.

The receiver pin configuration:
5-24V: External power input, 5-24V DC, current less than 100 mA
0V: Power to the receiver, 0V.
Prob: Output of internal relay in the receiver. When the trigger is received, the receiver turned on the internal relay immediately, then Probe and COM link together.
COM: Output of internal relay in the receiver. When the trigger is received, the receiver turned on the internal relay immediately, then Probe and COM link together.

Troubleshooting instructions:
1. Press the tool setting device, the probe led light and RF led out.
Reason:  Check the receiver power, make sure that the receive work led flash.
 
2. Press the tool setting device, the probe led out, RF led out and low-power led out.
Reason: Check whether the battery is installed on the gauge; Check that the batteries are installed correctly negative; Check whether the battery has power.
 
3. Press the tool setting device, the probe led out, the RF led out and the low-power led light.